800-439-7740
We're here to Help. Ask the Expert.
RexShowerDoors.com banner image

INSTALLING THE PULL/HANDLE

The shower door glass has been drilled in the proper location for attaching the door handle or pull. Most styles use the same through the glass mount system. On back to back 'C' shaped pulls, the inside handle will be the one with the two small set screws (they face downward and remain very much out of sight). An Allen wrench is provided to remove the screws and separate the handles. Before separating the handles, take note of the order of the plastic washers and sleeve. During assembly, the plastic washers should be resting against the glass, and a plastic sleeve should be inside of each hole. This obviously protects the glass. Push the outside handle studs through the sleeve hole, then slide the inside handle over the studs. Tighten the set screws on the inside handle with the Allen wrench. While doing this, the handle will tighten itself to the glass.

Door Sweep

Copyright 2017 Rex Glass & Mirror Co., Inc.